Werbung
Verfügbare Sprachen
Verfügbare Sprachen
into this pan, or the water spout is
blocked.
The LED light may be damaged.
The control system has disabled the
lights due to the door being kept
open too long.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
The operating conditions described below are normal
The refrigerant generates a sound similar to flowing water.
Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
The sides of the appliance may get warm while the appliance is running.
When you operate the appliance for the first time or the temperature falls below
a certain level, the appliance will operate with high power to reach the preset
temperature.
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures..
You will hear the compressor click if it is activated or deactivated.
is caused by the compressor while running.
may be generated by sequential expansion and shrinkage of the components of
the cooling system. It is caused by variation of temperature before and after the
compressor is activated or deactivated.
The light is not working.
and do not indicate a malfunction.
Distinct noise
Condensed water in/on the appliance
Clicking
Knocking/snapping
Refer to replace LED lights in
cleaning and care chapter.
Close and reopen the door to
reactivate the lights.
Hum
44
Werbung
