Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Climatic classes
Look at chap. T
class of your appliance. Your appliance can be operated in rooms with
relevant room temperatures as named below.
CLIMATIC CLASS
SN
ST
3. Installation
1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild
detergent (see also chapter
components of the back of the appliance!
3. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is inside the appliance or at the back.
Minimum distances required for proper ventilation:
Free space above
Please refer to the illustration below for additional information (data in mm):
D
ECHNICAL
N
T
CLEANING AND MAINTENANCE
Back ↔ wall
for information about the climatic
ATA
AMBIENT TEMPERATURE
0
0
+10
→+32
0
0
+16
→+32
0
0
+16
→+38
0
0
+16
→+43
31
C
e.g. unheated cellar
C inner home temperature
C inner home temperature
C inner home temperature
). Never remove any
Min. 75 mm
Min. 100 mm
Werbung
