Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation instructions | MIE 8-00N | MIE 16-00N | MIE 32-00N | MIE 4-02N | MIE 8-02N | MIE 3-02N | MIE 6-02N
3.3.3.
Assigning input transport streams directly to a modulator
With the "Passthrough" mode, the programs of an input transport stream can be forwarded 1:1 to a modulator.
Select the Passtrough mode.
Select the desired modulator.
Click OK, the stream will be added and scanned
The channels of the stream will be directly assigned to the selected modulator.
Programs that were previously assigned to the modulator will be removed.
3.3.4.
Redundant Input Transport Streams
Both IPTV IN1 and IPTV IN2 receive all input transport streams in parallel. By default, only the input transport streams received at
IPTV IN1 are processed. However, if an input stream from IPTV IN1 fails, then for this stream it is automatically switched to IPTV
IN2. If the stream is available again at IPTV IN1, then it is automatically switched back to IPTV IN1.
The status of the individual input streams displayed in the Input column. In the following illustration, stream 239.0.0.2:1234 is
received from IPTV IN2, all other input streams from IPTV IN1.
The input port for a single stream or for all streams can also be switched manually. If the user switches the input port manually,
the automatic switch-back for this stream is deactivated until the restart.
Page 24 of 70
BA_MIE-N.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2023-06-15
Werbung
