axing MIE 8-00N Betriebsanleitung Seite 120

Operation instructions | MIE 8-00N | MIE 16-00N | MIE 32-00N | MIE 4-02N | MIE 8-02N | MIE 3-02N | MIE 6-02N
4.4.3. Upload initialization data
In the section UPLOAD SYSTEM INITILIZATION DATA FROM FILE you can upload the initialization data from a file to the module.
 After an update, initialization data saved with older software versions can be loaded into the device with a newer Software
version.
 Initialization data saved with a newer software version cannot be loaded into devices with an older Software version.
 Choose a configuration file.
 Click on UPLOAD.
The upload will take a few seconds.
4.5. Reboot
4.5.1. Rebooting
Under REBOOT THE SYSTEM the device can be rebooted.
 Click on REBOOT.
After rebooting, the password must be entered again.
Page 50 of 70 BA_MIE-N.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2023-06-15