3.3.2.
Add one or multiple input streams
Click Add Input.
The Add input streams dialog opens.
Enter the IP address of the stream and its port.
Click OK, the stream will be added and scanned.
To add multiple streams:
Activate the option Add multiple streams.
Enter the End IP.
Streams are created between the IP Address and the End IP
(in the example 239.0.0.1, 239.0.0.2 and 239.0.0.3).
If desired, activate the option Erease all current streams.
IMPORTANT: All previous configured input streams will be deleted. Only the newly created ones are available.
2023-06-15 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIE-N.pdf |
Page 23 of 70