axing MIE 8-00N Betriebsanleitung Seite 124

Operation instructions | MIE 8-00N | MIE 16-00N | MIE 32-00N | MIE 4-02N | MIE 8-02N | MIE 3-02N | MIE 6-02N
4.9.2. Load license file
Licenses can be loaded onto the headend in different ways:
By AXING support via remote maintenance software (e.g. TeamViewer):
•
The headend must be connected to a PC/notebook via
Ethernet.
•
The notebook requires Internet access.
• You need a valid software license and the current version
of the remote maintenance software.
By the user or AXING support via SMART Portal:
•
The headend must be integrated into the SMART Portal
and requires Internet access.
•
If AXING support should upload the license file, the
option Allow AXING support must be activated for the
headend.
By the user in the configuration interface:
• You have ordered a software extension and received a
license file by e-mail.
• You upload the license file (SN.lic) in the configuration
interface of the headend under
MAINTENANCE>LICENSES.
Note: The new function is only available after a restart of the
headend.
 Click on LICENCES.
The dialog ACTIVATED LICENSES will be opened.
• The already activated licenses and their expiration date
are displayed (permanent means that the license never
expires).
 Under UPLOAD A NEW LICENSE, select a LICENSE FILE.
 Click on UPLOAD.
The upload will take a few seconds.
The new license is listed in the ACTIVATED LICENSES
dialog.
 Reboot the device and log in again. The new function is only available after a restart of the headend.
Page 54 of 70 BA_MIE-N.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2023-06-15