Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation instructions | MIE 8-00N | MIE 16-00N | MIE 32-00N | MIE 4-02N | MIE 8-02N | MIE 3-02N | MIE 6-02N
4.7.
SNMP
4.7.1.
SNMP (Simple Network Management Protocol)
The Simple Network Management Protocol (SNMPv1 or SNMPv2c) is supported. With the help of a Network Management Station
(NMS) information can be read or alarms can be received.
Supported SNMP message types are GET-REQUEST, GETNEXT-REQUEST and TRAP.
SNMP Agent
Set the Agent switch to ON to use GET-REQUEST and GETNEXT-REQUEST.
The Agent Port is by default 161, if necessary, enter another port.
In the SNMP Version field, select version SNMPv1 or SNMPv2c. SNMPv2c is recommended.
The Community Name (the SNMP "password") is public by default, if necessary, enter a different community name.
Traps
Traps can also be output independently of the SNMP agent.
If traps are to be transmitted from the device, then set the Traps switch to ON.
Enter the Destination Address of the NMS receiving traps.
Enter Destination Port of NMS, by default 162 is used.
MIB object definition
The MIB object definition is stored in the device.
Click AXING-MIB.txt to open the definition.
If you are connected to the device in the network, then you can download the file from the device.
URL = [IP address of device] /MIB/AXING-MIB.txt
For example: 192.168.0.145/MIB/AXING-MIB.txt
Page 52 of 70
BA_MIE-N.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2023-06-15
Werbung
