2.9.
Upgrading
2.9.1.
Software extension
The MIE 8-00N can be expanded from 8 to 16 output modulators with the MIS 8-16 software extension (see 3.8 Licenses for
Software Extensions on page 53).
2.9.2.
Hardware extension
The MIE 8-00N, MIE 16-00N, MIE 4-02N and MIE 3-02N can be extended with an additional hardware module.
•
MIE 8-00N and MIE 16-00N with the extension module MIM 16-00N
•
MIE 4-02N with the extension module MIM 4-02N
•
MIE 3-02N with the extension module MIM 3-02N
Disconnect the device from the mains.
Disassemble the cover plate on the back.
Insert the module carefully.
The module noticeably snaps into the contacts.
Screw the module with the screws of the cover plate.
Then reconnect the device.
Configure the new module as described in the chapter Configuration.
2023-06-15 | Technical improvements, changes in design, printing- and other errors reserved. | BA_MIE-N.pdf |
Mounting screws
Mounting screws
Page 17 of 70