Climadiff MILLESIME 150 Gebrauchsanweisung Seite 51

Add a cellar
Add a « Connected wine cellar»
•
Define the type of cellar "connected cellar" or "not connected cellar". MILLESIME models are
part of the "connected cellar" category. Click on "connected cellar".
•
The application asks you to activate Bluetooth; its activation is necessary to configure the
cellar.
•
Once your cellar is connected to Bluetooth, the application asks you to select a Wifi network.
In the case of a Wi-Fi network, the password of the Wi-Fi router is requested. If the Wi-Fi
connection fails, check the password and/or check the distance between your cellar and your
Wi-Fi router. Too great a distance or too thick walls can block the connection. Bring the cellar
closer to the Wi-Fi router to allow its connection or add a Wi-Fi repeater.
You now have a VINOTAG® account to add your first cellar or a new cellar (the
application offers you the possibility of managing several cellars from a
selection of models).
Warning ! Under no circumstances should you quit the application when
adding a cellar.
• Adding a first cellar: the creation of your cellar is mandatory when creating
your account, follow the different steps below.
• Adding a new cellar: you want to manage a new cellar from your application,
go to the "profile" -> "my cellars" page and click on the "add a cellar" button;
follow the different steps below.
ENGLISH
51