Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
The use of a separate 2.4ghz/5ghz network may be required in the event of pairing
problems. In this case, contact your internet provider so that the internet network is
disconnected. The cellar operating on the 2.4ghz network.
In the event of a power cut, the cellar cannot take any settings into account, and also loses the settings
it would have while waiting for synchronization with the server. When restarting after a power outage,
the last settings saved in the cloud will be used.
Scope of the cellar Bluetooth
Attention ! MILLESIME cabinets work with Bluetooth during the pairing phase of the cabinet to the
WiFi network. During its daily use, the cellar communicates only through the WiFi network. The cellar's
Bluetooth range is 1m maximum with the door closed.
5. OPERATING INSTRUCTIONS
Control panel
The MILLESIME cabinets are equipped with an electronic control panel with LCD screen. The control
panel is located inside the cellar on the upper part.
The control panel differs between single and dual temperature zone models
SINGLE ZONE
1. Press 3 seconds on the button to turn on or off.
2. Light on/off key. Press 5 seconds to change the lighting mode. (See "B" & "C" below)
3. Activation key for temperature change. Press 5 seconds to select a program. (See "Program")
4. The LCD screen shows the set temperature. It can also display informative and temporary icons
that indicate the status of the cellar.
5. Key to increase the set temperature by 1°C
6. Key to decrease the set temperature by 1°C
ENGLISH
42
Werbung
