Herunterladen Diese Seite drucken

TOOLCRAFT ZD-8908 Bedienungsanleitung Seite 17

Heißluft-löt-/entlötsystem für smd

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Introduction
Dear Customer,
thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and
handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating
instructions for reference!
If there are any technical questions, please contact: www.conrad.com/contact
2. Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due to an electric
shock.
The symbol with the exclamation mark in the triangle is used to indicate important information in these
operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Follow the operating instructions!
17

Werbung

loading

Diese Anleitung auch für:

2621035