Endress+Hauser PROline promass 83 II3G Bedienungsanleitung Seite 19

PROline Promass 83
II2G
EX
Zone 1
• Transmitter Promass 83 in:
EEx nRC [L] IIC
• Wall mount housing in IP 67
• Sensor in EEx nLR IIC:
Promass F DN 8...50
Promass M DN 8...50
Promass E DN 8...50
Promass A DN 1...4
Promass H DN 8...40
Promass I DN 8...40
• The maximum permitted cable length is 120 m when using cable
type (6 Li9YCYFCY or 6 Li9YFCY / 0.38 mm
reasons, the maximum cable length is limited to 20 m.
• For ambient and fluid temperature ranges, and temperature
class, see Page 4.
➅ ➆
For number references
Endress+Hauser
Hazardous area
Promass 83 F
remote version for heating
(long-necked version)
➆
Promass 83 F
DN 8...150
➆
Promass 83 M
DN 8...80
➆
Promass 83 E
DN 8...50
➆
Hazardous area
2
), however for signal
see Page 12.
II3G
Esc
- +
E
Promass 83
Promass 83 A
DN 1...4
Promass 83 H
DN 8...50
Promass 83 I
DN 8...50
Zone 2
• Transmitter Promass 83 in:
EEx nRC [L] IIB
• Wall mount housing in IP 67
• Sensor in EEx nLR IIB:
Promass F DN 80...150
Promass M DN 80
Promass H DN 50
Promass I DN 50, DN 40 FB (full bore)
or
• The maximum permitted cable length is 120 m when using cable
type (6 Li9YCYFCY or 6 Li9YFCY / 0.38 mm
reasons, the maximum cable length is limited to 20 m.
• For ambient and fluid temperature ranges, and temperature
class, see Page 4.
<
Safe area
➅
I
O
Operation via
➆
HART handheld
DXR 275 (only for
non-intrinsically safe
current circuits)
➆
➆
EX
Safe area
2
), however for signal
0
3