Package Contents; Description (Fig. A); Assembly And Adjustments - DeWalt DCD999NT Bersetzung Der Originalanweisungen

EnGLIsH
Battery Type
The following tools operate on a 18 volt battery pack: DCD999 .
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCBP034, DCBP518, DCB546, DCB547. Refer to
Technical Data for more information.

Package Contents

The package contains:
1 Brushless cordless hammerdrill
1 Charger
1 Side handle
1 Magnetic bit holder (Optional accessory)
1 Belt hook (Optional accessory)
1 Li-Ion battery pack (C1, D1, E1, H1, L1, M1, P1, S1, T1, X1,
Y1 models)
2 Li-Ion battery packs (C2, D2, E2, H2, L2, M2, P2, S2, T2, X2,
Y2 models)
3 Li-Ion battery packs (C3, D3, E3, H3, L3, M3, P3, S3, T3, X3,
Y3 models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
n
Visible radiation. Do not stare into light.
Date Code Position (Fig. B)
The date code 16 , which also includes the year of manufacture,
is printed into the housing.
Example:
Year and Week of Manufacture

Description (Fig. A)


WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
components
Battery pack
1
Battery release button
2
Variable speed trigger switch
3
34
2022 XX XX
Forward/reverse control button
4
Torque adjustment collar
5
Keyless chuck
6
Chuck sleeve
7
Speed selector
8
Worklight
9
Worklight switch
10
Belt hook (Optional accessory)
11
Mounting screw
12
Bit holder (Optional accessory)
13
Side handle
14
Main handle
15
Intended Use
These hammerdrills are designed for professional drilling,
percussion drilling and screwdriving applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These drills/drivers/hammerdrills are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool Handle
1. Align the battery pack with the rails inside the tool's
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
1. Press the battery release button
battery pack out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
is fully charged.
1
2 and firmly pull the