Package Contents - DeWalt DCD937 Bersetzt Von Den Originalanweisungen

ENGLISH
NOTE: Battery packs should not be stored
completely depleted of charge. The battery pack will
need to be recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Battery charging.
Battery charged.
Battery defective.
Hot/cold pack delay.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care
for the environment.
Charge D WALT battery packs only with
E
designated D WALT chargers. Charging
E
battery packs other than the designated
D WALT batteries with a D
E
charger may make them burst or lead to
other dangerous situations.
Do not incinerate the battery pack.
38

Package Contents

The package contains:
1 Brushless cordless drill/driver
(DCD932, DCD990)
1 Brushless cordless hammerdrill
(DCD937, DCD995)
2 Li-Ion battery packs (M2)
2 Li-Ion battery packs (P2)
3 Li-Ion battery packs (M3)
3 Li-Ion battery packs (P3)
1 Kitbox
1 Charger
1 Side handle
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are
not included with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
a. Trigger switch
b. Forward/reverse control button
c. Worklight
d. Chuck
e. Torque adjustment collar
f. Gear shifter
g. Side handle
h. Battery pack
i. Battery release button
j. Belt hook
k. Mounting screw
l. Magnetic bit holder
WALT
E
INTENDED USE
These drills drivers/hammerdrills are designed
for professional drilling, percussion drilling and
screwdriving applications.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.