Qlima D 820 A Smart Bedienungsanleitung Seite 32

WIRELESS OPERATION (ONLY AVAILABLE ON SMART MODELS)
BASIC RF FEATURES
Parameter
Working frequency
Conducted power
Wireless standard
Data transmission rate
Antenna type
1. Enable bluetooth and WiFi on your phone or tablet. Use your phone to scan the
QR code below or search "Smart life" in Google play or App store to download
and install the app.
2. Open the app and sign in.
3. Press the 'MODE' button for 3 seconds to activate the Wi-Fi matching process.
4. Follow the instructions in the app.
NOTE:
• The unit supports 2.4 GHz Wi-Fi networks only. Check your network frequency, contact
your Internet provider or refer to your wireless router manual.
• If the unit is having trouble connecting to the Wi-Fi network, it may be too far from the
router.
• The Wi-Fi connection may be interrupted because of the home network and/or
surrounding wireless environment.
• The Wi-Fi connection may not work depending on the Internet provider.
D. MAINTENANCE
Make sure the appliance has been turned off and if applicable detached from any energy
source.
CLEANING
Only use a soft, dry cloth to wipe the appliance clean. If the appliance is especially dirty, you
can use a cloth soaked in handwarm water to wipe it clean.
The appliance must be periodically cleaned. Before and after use always check for dust formation.
Clean of any dust with a dry clean cloth or brush.
PER SEASON
Before or after the season or other periods of frequent use, always clean the appliance case, filters
and tank. Make sure the tank is empty and no drain is connected when storing the appliance.
4
32
Description
2.400 to 2.4835 GHz
13 dBm to 23 dBm
IEEE 802.11b/g/n (channels 1 to 14)
11b: 1, 2, 5.5, 11 (Mbps)
11g: 6, 9, 12, 18, 24, 36, 48, 54 (Mbps)
11n: HT20 MC S 0 to 7
PCB antenna with a peak gain of 2.54 dBi