Send A Fax Using An Extension Phone - HP Officejet 4630 e-All-in-One Serie Bedienungsanleitung

Use fax
Send a standard fax
1. Load your original print-side down on the right front corner of the scanner glass or print-side up in the
Automatic Document Feeder (ADF).
2. From the Home screen on the printer display, press the Up and Down buttons to select Fax, and then press OK.
3. Select Black Fax or Color Fax.
4. Enter the fax number by using the keypad, and then press OK.
Tip: To add a pause in the fax number, press * repeatedly, until a dash (-) appears on the display.
If the recipient reports problems with the quality of the fax you sent, try changing the resolution or contrast of
your fax.

Send a fax using an extension phone

1. Dial the number by using the keypad on the extension phone.
Note: Do not use the keypad on the printer control panel when sending a fax using this method.
2. If the recipient answers the phone, you can engage in a conversation before sending the fax.
Note: If a fax machine answers the call, you will hear fax tones from the receiving fax machine.
3. Load your original print-side down on the right front corner of the scanner glass or print-side up in the ADF.
4. From the Home screen on the printer display, press the Up and Down buttons to select Fax, and then press OK.
5. When you are ready to send the fax, press OK, select Send New Fax, and then select Black Fax or Color Fax.
If you were on the phone with the recipient, ask the recipient to start receiving the fax when they hear fax tones on
the fax machine. When the printer begins faxing, you can hang up the phone or remain on the line. You might not
hear fax tones during fax transmission.
For more information about other ways you can send faxes, such as scheduling a fax to be sent later or sending
faxes from a computer, see the electronic Help.
Receive a fax automatically
By default, the printer automatically answers incoming calls and receives faxes.
To receive faxes manually, turn off Auto Answer from the printer control panel.
The printer will answer calls after the number of rings specified in the Rings to Answer setting.
Note: If an answering machine is connected to the printer, the Rings to Answer setting for the printer must be set
to a higher number than the answering machine.
1. Make sure the printer is turned on and paper is loaded.
2. From the Home screen on the printer display, press the Up and Down buttons to select Fax, and then press OK.
3. Select Settings, and then select Auto Answer, and then select On.
Note: If you have subscribed to a voice mail service on the same phone line that you will use for faxing, you
cannot receive faxes automatically. You must be available to respond in person to incoming fax calls. (If you
want to receive faxes automatically, contact your phone company to subscribe to a distinctive ring service or
to obtain a separate phone line for faxing.)
Tip: The printer can store received faxes in its internal memory. To reprint these faxes, see "Reprint received
faxes from memory" on the next page.
7