Krups ESPRESSERIA AUTOMATIC EA82FB10 Bedienungsanleitung Seite 17

The warning message will remain displayed if the coffee grounds collector is not slotted in fully or not fitted correctly.
You cannot make espresso or coffee while the warning message is displayed.
The coffee grounds collector has a capacity of 9 coffees.
Rinsing out the circuits: see page 12
Machine cleaning program – total duration: about 13 minutes
You should perform the cleaning program about every 350 preparations of espresso or coffee.
The appliance will let you know when you need to proceed with cleaning through the 'clean' light coming on.
To perform the cleaning program, you will need a container with minimum capacity of 0.6 litres and a KRUPS (XS 3000)
cleaning tablet.
Press the key to start the automatic cleaning program when the "Cleaning needed" message is displayed.
Just follow the instructions shown on the screen.
The automatic cleaning program is in 2 parts – the cleaning cycle itself, then 1 rinsing cycle. This program lasts about 13
minutes. Press to perform cleaning at any time and then choose MAINTENANCE => OK => CLEANING from
the menus displayed.
If your machine is unplugged when cleaning or if there is a power cut, the cleaning programme will re-start at the step
in progress when the incident occurred. You will not be able to postpone this operation. This is essential due to water
system rinsing reasons. In this case, a new cleaning tablet may be required. Be sure to complete the entire cleaning
cycle to avoid any risk of irritation (seek medical advice if cleaning solutions are accidently swallowed). The cleaning
cycle is a continuous cycle and the pump can be heard intermittently. Do not put your hands under the coffee outlets
during the cycle.
Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage that may result from the
use of tablets from other brands.
You can obtain cleaning tablets from KRUPS Service Centres.
Automatic scale removal program – total duration: about 20 minutes
If your product is equipped with our Claris - Aqua Filter System cartridge F088 - Please remove this cartridge
during the descaling operation.
The quantity of scale deposited depends on the hardness of the water used. The appliance will automatically warn you
with a message when you need to proceed with scale removal.
To perform the cleaning program, you will need a container with minimum capacity of 0.6 litres and a KRUPS F 054 (40 g)
cleaning sachet.
Press the key to start the automatic cleaning program when the "Scale removal needed" message is displayed.
Just follow the instructions shown on the screen, making sure the sachet dissolves fully.
The scale removal program is in three parts – the scale removal cycle itself, then 2 rinsing cycles.
Only use KRUPS scale removal products. You can obtain scale removal products from KRUPS Service Centres.
The manufacturer may not be held responsible for damage to the appliance through use of other products.
If a power cut occurs during the cycle or if you unplug your machine, the cycle will re-start at the step in progress when
the incident occurred, without the option of postponing this operation.
Be sure to complete the entire scale removal cycle to avoid any risk of intoxication. The scale removal cycle is a continuous
cycle and the pump can be heard intermittently. Do not put your hands under the coffee outlets during the cycle.
Make certain to protect your work surface during scale removal cycles, especially if they are made of marble,
stone or wood.
general maintenance
Always remove the power supply cord from the socket and let your appliance cool down before cleaning it.
Do not use utensils or cleaning products likely to scratch or corrode the appliance.
Wipe the body of the appliance on the outside using a moist cloth.
Rinse the water tank with fresh water.
These parts are not designed to go into the dishwasher.
15