Temperature Selection - Climadiff Avintage DVP265G Bedienungsanleitung

TEMPERATURE SELECTION

If a new setting or an adaptation of the preservation temperature is
considered to be necessary:
• Press the SET key «
• The possible settings are: temperature setting, winter system temperature
setting, high temperature alarm setting.
• The different possible settings will be automatically displayed after some
seconds in a sequential mode, or you can select one by pressing
successively the SET key "
• According to your model the below screen is displayed :
• Press the UP and DOWN keys «
requested, and press the SET key "
few secondes and you will be back into the main menu. When the setting is
selected, the temperature is in a blinking mode, and then you can adjust it.
To decrease the temperature :
• Press the DOWN key "
degree.
• Validate your selection by pressing the SET key «
To increase the temperature :
• Press the UP key «
degree.
• Validate your selection by pressing the SET key «
All manuals and user guides at all-guides.com
» during 3 seconds to enter into the main menu.
» until the selected function.
» to decrease the temperature degree to
» to increase the temperature degree to
» to select the temperature
» to validate your choice, or wait a
»
»
70