Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
16
Internal
Programs
17
18
Dimmer
Speed
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse-holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse-holder.
Step 3: Install the new fuse in the fuse-holder.
Step 4: Replace the fuse-holder in the housing.
000-010
No Function
011-025
Program 1
026-050
Program 2
051-075
Program 3
076-100
Program 4
101-125
Program 5
126-150
Program 6
151-175
Program 7
176-200
Program 8
201-240
Program 9
241-255
Sound Show
000-255
Speed of the internal programs, increasing
000-010
Microphone sensitivity off
011-255
Microphone sensitivity on, with increasing sensitivity
000-051
Control Board setting dimmer speed
052-101
Neutral
102-152
Dimmer speed 1
153-203
Dimmer speed 2
204-255
Dimmer speed 3
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
36/37
00094546, Version 1.0
Werbung
Inhaltsverzeichnis
