Dometic Midi Heki FL Montage- Und Bedienungsanleitung Seite 7

Midi Heki FL
6.3 Mounting the roof light
Supplements fig. 4
The scope of delivery includes a mounting set, which is suitable for a roof thickness
of 30 – 34 mm. For a roof thickness of 25 – 29 mm and 35 – 60 mm, a suitable
mounting set (see table) is needed.
1. Measure the roof thickness W.
2. Choose a suitable mounting set:
Roof thickness
25 – 29 mm
30 – 34 mm
35 – 42 mm
43 – 52 mm
53 – 60 mm
Electric version only
!
WARNING! Risk of injury
Before commencing disconnect the vehicle power supply and ensure
that it cannot be restarted.
A
NOTICE! Damage hazard
Ensure that no cable is damaged during installation.
➤ Lay the power supply line in the middle on the long side, where the hinges
should go.
See fig. 5
➤ Check that the roof light has sufficient space around it (approx.1 to 2 mm) in the
wall section.
See fig. 6
➤ Clean the roof opening in the mounting area.
EN
Ref. no.
9104100261
Included in the scope of delivery
9104100262
9104100263
9104100264
9104100265
Installation
7