Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Contents
List of spare parts / Spare parts diagram KS 130 basic
List of spare parts / Spare parts diagram KS 130 control
Safety instructions
In order to be able to use the appliance properly and safely, every user
must first read the operating instructions and observe the safety instruc-
tions contained therein. Take care of these operating instructions and
keep them in a place where they can be accessed by everyone.
Only staff who have been trained accordingly, know the appliance and
are authorised to carry out work in this field should use this appliance.
The machine may only be opened by trained specialists - even during
repairs. The machine is to be unplugged from the mains before opening.
Live parts inside the machine may still be live for some time after unplug-
ging from the mains.
Page
Covering or parts that are capable of being removed
2
from the unit without accessory equipment have to
2
be reattached to the unit for safe operation in order
19
to prevent, for example, the ingress of fluids, foreign
20
matter, etc. .
21
When working with the shaking unit, the user must select and wear his
21
personal protective equipment according to the mixing hazard catego-
21
ry.
Defective or inadequate protective equipment can expose the user
22
to the risk of spurting liquids, projectile parts or being pulled in at the
22
shaking table or support.
23
Never touch moving parts (risk of crushing, impact
26
and cutting, see fig. 1: Danger zones).
27
Ensure that parts of the body, hair or items of clothing cannot be trap-
28
ped by the motion parts.
28
Please follow the relevant safety instructions and guidelines, and occu-
29
pational health and safety regulations for use in the laboratory.
30
32
Beware of the high dead weight
33
of the appliance when transpor-
33
ting. Ensure that your fingers do
34
not get crushed when setting
34
down the appliance.
52/53
Always install the appliance on a
54/55
flat, stable non-slip base.
Before use, please ensure that the
knob for setting the shaking rate
is at the left stop as the appliance
starts up at the last shaking rate
which was set. Pay attention to
the vessels on the shaking table
when setting the shaking rate.
This will prevent any of the medi-
um to be shaken from spurting
out of the sample vessels.
fig. 1 danger zones
19
Werbung
Inhaltsverzeichnis
