Volume Adjustment (Drc); Deleting Inactive Stations; Fm Mode; Switching On Fm Radio Mode - TechniSat DIGITRADIO 3 Bedienungsanleitung

7.2.8 Volume adjustment (DRC)

The Volume Adjustment menu item is used to set the compression rate, which
compensates for dynamic fluctuations and the associated volume variations.
> Hold down the MENU button and use the < or > buttons to select the [Volume
Adjustment] item.
> Press the OK button.
> Select the compression rate using < or >:
DRC high -
DRC low -
DRC off -
> Confirm by pressing the OK button.

7.2.9 Deleting inactive stations

This menu item is for removing old stations and those no longer being received from
the station list.
> Hold down the MENU button and use the < or > buttons to select the [Delete
inactive stations] item.
> Press the OK button.
This is followed by the [Delete] prompt asking if the inactive stations are to be
deleted.
> Use < or > to select [Yes] and confirm by pressing the OK button.

8 FM mode

8.1 Switching on FM radio mode

> Switch to FM mode by pressing the MODE button.
> [FM] is shown on the display.
When you switch on the radio for the first time, the frequency 87.5 MHz is set.
If you have already set or saved a station, the radio plays the last station set.
In the case of RDS stations, the station name appears.
Align the telescopic antenna to improve reception (Section 5.3.3).

8.2 FM reception with RDS information

RDS is a procedure for broadcasting additional information via FM stations.
Broadcasters with RDS broadcast their station name or the programme type, for
example. This is shown in the display. The device can show the RDS information: RT
(Radio text), PS (Station name), PTY (Programme type).
high compression
low compression
compression switched off.
DE
EN
FR
NL
69