Intended Use - DeWalt DCH283 Bersetzt Von Den Originalanweisungen

EnGLIsH
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548. Refer to Technical Data for
more information.
Package Contents
The package contains:
1 Cordless rotary hammerdrill
1 Side handle and depth rod
1 Charger
1 Battery pack (D1, L1, M1, P1)
2 Battery packs (D2, L2, M2, P2)
3 Battery packs (D3, L3, M3, P3)
1 Keyless chuck (DCH254, DCH274)
1 Kit box
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Visible radiation. Do not stare into light.
Date Code Position
The date code, which also includes the year of manufacture, is
printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Variable speed switch
1
Forward/reverse button
2
Mode selector dial
3
Mode selector button
4
Side handle
5
Battery pack
6
Release button
7
Main handle
8
SDS Plus tool holder
9
36
Sleeve
10
Depth rod
11
Depth rod release button
12
Worklight (DCH253,
13
DCH254, DCH273, DCH274,
DCH283)
Utility hook (DCH273,
14
DCH274, DCH283)

Intended Use

Your cordless rotary hammerdrill has been designed for
professional drilling and hammerdrilling applications, as well as
screwdriving and chipping applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
Your cordless rotary hammerdrill is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Overload Clutch
In case of jamming of a drill bit, the drive to the drill spindle is
interrupted. Because of the resulting forces, always hold the
tool with both hands and take a firm stance. After the overload,
release and depress the trigger to re-engage drive.
Mechanical Clutch
DCH243, DCH253, DCH254, DCH283
On units fitted with a mechanical clutch the indication that the
clutch has activated will be an audible ratcheting together with
increased vibration.
Electronic Clutch
DCH273, DCH274
When the electronic clutch activates, the motor is repeatedly
switched on and off for a few seconds to replicate the feedback
associated with a mechanical clutch.
Anti-Rotation System (Fig. E)
DCH283
In addition to the clutch, an anti-rotation system offers increased
user comfort and safety through an on-board, anti-rotation
technology capable of detecting if the user loses control of
the hammer. When a jam is detected, the torque and speed are
reduced instantly. This feature prevents self rotation of the tool
reducing the occurrence of wrist injuries.
The anti-rotation system indicator
indicate status.
Indicator Diagnosis
OFF Tool is functioning Follow all warnings and instructions
normally when operating the tool.
SOLID Anti-Rotation With the tool properly supported,
System has release trigger. The tool will function
been activated normally when the trigger is depressed
(ENGAGED) again and the indicator light will go out.
will illuminate to
15
Solution