Initial Use; Items Supplied And Transport Inspection; Disposal Of The Packaging - Crivit CEB 2000 A1 Bedienungsanleitung

Protect the battery packs against moisture and
■
the penetration of liquids. After attaching the
battery packs to your shoes, they must always
be connected (even when not switched on) to
the insoles when outdoors. Thereby, the pen-
etration of moisture and soiling in the connec-
tor sockets or plugs will be avoided.
Operate the insoles only with the supplied bat-
■
tery packs.
Use only the supplied power adapter to charge
■
GB
the battery packs. The power adapter is de-
signed for indoor use and may not be exposed
to moisture.
■
use and should not be exposed to moisture.
In the event of malfunctions or thunderstorms,
■
remove the plug from the mains power socket.

Initial use

Items supplied and transport inspection

The device is delivered with the following components as standard:
▯ 2 x heatable insoles with integrated heating elements and
connection cables
▯ 2 x Li-ion battery pack
▯ Power adapter
▯ This operating manual
NOTE
► Check the contents to make sure everything is there and for
visible damage.
► If the delivery is not complete, or is damaged due to defec-
tive packaging or through transportation, contact the Service
Hotline (see chapter Service).

Disposal of the packaging

The packaging protects the device from transport damage. The
packaging materials are selected from the point of view of their
environmental friendliness and disposal technology and are
therefore recyclable.
46
The power adapter is designed for indoor
CEB 2000 A1