Disposal - Austroflamm Backfach Installationsanleitung

Backfach
13

Disposal

NOTICE
To dispose of the fireplace insert properly, get in touch with the local (possibly municipal) waste dis-
posal company.
NOTICE
We recommend that you remove those components of the fireplace insert which have been in contact
with fire such as window, combustion chamber, grates, firebox lining (Keramott), ceramic, sensors and
baffle plates and dispose of them in the household waste.
NOTICE
For correct uninstallation and dismantling of the fireplace insert,, contact your Austroflamm specialist
dealer.
Electric and electronic components
Remove the electric and electronic components from the appliance by dismounting them. These com-
ponents must not be disposed of via non-recyclable waste. Disposal should be carried out profession-
ally via the electrical and electronic waste return system.
Keramott
Remove Keramott components. If present, fastening elements must be removed beforehand. Ker-
amott components that have been in contact with fire or flue gas must be disposed of. Reuse or recyc-
ling is not possible. Local disposal options must be observed.
Steel sheet
Disassemble steel-sheet components of the appliance by mechanical crushing. If present, remove
seals beforehand. Dispose of steel sheet parts as metal scrap. Local disposal options must be ob-
served.
Cast iron
Disassemble cast-iron components of the appliance by unscrewing or flexing them from one another,
or alternatively by mechanical crushing. If present, remove seals beforehand. Dispose of the cast-iron
parts as metal scrap. Local disposal options must be observed.
Natural stone
Mechanically remove any natural stone present from the appliance and dispose of it as construction
waste. Local disposal options must be observed.
Fittings etc. (for water-carrying appliances)
Disassemble the components for carrying water by unscrewing and removing them and dispose of
them as metal scrap. Local disposal options must be observed.
Seals (glass fibre)
Mechanically remove the seals from the appliance. These components must not be disposed of via
non-recyclable waste.as glass fibre waste cannot be destroyed through burning. Dispose of seals as
glass- and ceramic fibre waste (artificial mineral fibres (AMF)). Local disposal options must be ob-
served.
EN 13 | Disposal
47