Disposal - Austroflamm Pallas 945029 Betriebsanleitung

Operating manual Pallas 945029
19

Disposal

NOTICE
To dispose of the stove properly, get in touch with the local (possibly municipal) waste disposal com-
pany.
NOTICE
We recommend that you remove those components of the stove which have been in contact with fire
such as window, combustion chamber, grates, firebox lining (Keramott), ceramic, sensors and baffle
plates and dispose of them in the household waste.
NOTICE
For correct uninstallation and dismantling of the stove, contact your Austroflamm specialist dealer.
Electric and electronic components
Remove the electric and electronic components from the appliance by dismounting them. These com-
ponents must not be disposed of via non-recyclable waste. Disposal should be carried out profession-
ally via the electrical and electronic waste return system.
Keramott
Remove Keramott components. If present, fastening elements must be removed beforehand. Ker-
amott components that have been in contact with fire or flue gas must be disposed of. Reuse or recyc-
ling is not possible. Local disposal options must be observed.
Steel sheet
Disassemble steel-sheet components of the appliance by mechanical crushing. If present, remove
seals beforehand. Dispose of steel sheet parts as metal scrap. Local disposal options must be ob-
served.
Cast iron
Disassemble cast-iron components of the appliance by unscrewing or flexing them from one another,
or alternatively by mechanical crushing. If present, remove seals beforehand. Dispose of the cast-iron
parts as metal scrap. Local disposal options must be observed.
Natural stone
Mechanically remove any natural stone present from the appliance and dispose of it as construction
waste. Local disposal options must be observed.
Fittings etc. (for water-carrying appliances)
Disassemble the components for carrying water by unscrewing and removing them and dispose of
them as metal scrap. Local disposal options must be observed.
Seals (glass fiber)
Mechanically remove the seals from the appliance. These components must not be disposed of via
non-recyclable waste.as glass fiber waste cannot be destroyed through burning. Dispose of seals as
glass- and ceramic fiber waste (artificial mineral fibers (AMF)). Local disposal options must be ob-
served.
EN 19 | Disposal
105