ECG NZ 212 Bedienungsanleitung Seite 32

Ironing with the steam burst
Press the spray button (fi g. 4) to iron hard to remove creases with a strong steam spray slowly (heavy spraying)
or quickly (fi ne spraying).
For fi ne fabrics, we recommend moistening the fabric or to inserting a damp cloth between the fabric and
iron before using the spray function. Prevent stains from appearing by not using the spray function on silk
or synthetic material.
Vertical steam burst
Hold the iron in an upright position and hold the spray button down to iron and straighten creased drapes,
curtains, clothes etc. (fi g. 6). Wait a few seconds before pressing again. The spray function is only available at
high temperatures. Stop using the spray function as soon as the soleplate temperature indicator lights up.
Continue ironing only after the indicator light goes out.
Attention: Never direct the steam at persons or animals.
Automatic steam emission function
Turn the steam control to the ON position to confi gure automatic steam output corresponding to the
soleplate temperature.
Sprinkling
Press the sprinkling button to dampen hard to remove creases (fi g. 2).
EN
32