Mode Of Operation; Intended Use; Improper Use; Foreseeable Improper Use - HEYLO DE2XL Betriebsanleitung

Electric heater DE2XL
The scope of supply includes:
– Air heater
– Operating manual
Available accessories: see Accessories list.

Mode of operation

The device is equipped with a heating element, a fan
and a thermostat.
Air is sucked in by the fan on the inlet side, routed
through the heating element where it is heated and
then emitted on the outlet side.
The device can generate a room temperature of up
to 40 °C.
The thermostat identifies the temperature of the air
taken in at the air inlet and then regulates the tem-
perature of the heating element. The heating ele-
ment and the fan are switched off when the set room
temperature (maximum 40 °C) is reached at the air
inlet.
The heating element and the fan are switched back
on automatically when the room temperature falls
below the set heating temperature.
See also
 Intended use [ 26]
15.2.1

Intended use

The device serves to generate warm air. The warm
air can be used for spot heating or for heating en-
closed spaces.
Intended use also includes observance of the oper-
ating conditions (see operating conditions
Any other use or any application transcending the
specified use is considered improper use. Improper
use will result in all warranty claims becoming void.
See also
 Technical details [ 32]
26 / 34
15.2.2
Any uses other than the heating of air are prohibited.
Improper use may lead to danger.
– Improper use is, for example, if safety-related
components are interfered with without authori-
zation.
– In addition, improper use is if the specified oper-
ating conditions are not met or the device is in-
sufficiently maintained.
15.2.3
The following types of misuse can be envisaged:
– Operation while ignoring prescribed safety clear-
ances
– Operation while ignoring applicable operating
conditions
15.3
15.3.1
The fan in the device is installed vertically. The fan
draws in the ambient air ans blows it through the
PTC heating element. This causes the air to be
heated up and is then emitted in heated form to the
room.
15.3.2
Persons can be injured on the device if the safety
devices are not properly installed and set. Do not
modify, dismantle or take any of the safety devices
[ 24]). out of operation. All the safety devices must be
freely accessible at all times.
Familiarize yourself with all the safety devices; this
way personal injury and/or damage to property can
be prevented or minimized.

Improper use

Foreseeable improper use

Device components

Fan

Safety devices

EN