Operation - HEYLO DE 10 E Bedienungsanleitung

3. Operation

3 N ~ 400 V / 50 Hz
16 A CEE plug (DE 10 E)
32 A CEE plug (DE 20, DE 20 S)
63 A CEE plug (DE 30)
Startup
1. Plug CEE plugs into suitable socket outlets. The socket connector must be
grounded and have the guarantee by a residual current circuit breaker.
2. Make sure that the specified safety distances are maintained (see 4.3)
3. Do not operate
4. Switch A is to operate as a heater. Here you can start the heating process. The
desired temperature can also be adjusted to switch A. Except for the model DE
10 E, there is only one heat setting selected,
Switch
position
0
1
2
3
5. Switch B is for use as a fan. Here you can use the device as a pure Ventilation
device use.
6. For operation with room thermostat the cap attached to the socket insert of the
device must be removed. Now the thermostat plug can be plugged into the
device socket. For operation without room thermostat the cap must be always
installed
7. Adjust room thermostat (optional accessory) to the desired temperature. Now
the unit operates automatically and turns off when the set temperature is
reached at the room thermostat
unattended.
DE 10 E DE 20
OFF OFF
9 kW 6 kW
- 12 kW
- 18 kW
DE 20 S
OFF
6 kW
12 kW
18 kW
19
DE 30
OFF
9 kW
18 kW
27 kW
EN