About This Operating Manual; The Purpose Of This Manual; Keep The Manual Safe And At Hand At All Times; Symbols And Definitions Used - HEYLO DE2XL Betriebsanleitung

Electric heater DE2XL
13 About this operating
manual
This operating manual (hereinafter referred to as the
"manual") will enable you to operate the DE2XL-
series electric heater (hereinafter referred to as the
"device") safely. It describes the device manufac-
tured by HEYLO GmbH (hereinafter referred to as
HEYLO).
– Please read the manual carefully.
– Follow all safety instructions.
13.1

The purpose of this manual.

The manual should be used by the company operat-
ing the device and all the staff who use it as a guide
and reference book pertaining to the operation and
technical aspects of the device.
The technical data concerning settings, maintenance
and the electrical features have been prepared for
specialists who are specially authorised for these
areas of responsibility. Unauthorised persons may
not carry out the work specified here.
13.2 Keep the manual safe and at hand
at all times
The manual must always be kept where the machine
is located. The manual must be available to all oper-
ators of the device throughout the service life of the
device.
13.3

Symbols and definitions used

This section explains the symbols used in this man-
ual.
Instructions
The safety instructions in this manual contain the
following elements:
20 / 34
DANGER
Warning indicating an immediate danger for
people
This safety instruction warns of an immediate dan-
gerous situation which can lead to serious injury or
death.
WARNING
Warning indicating a potential danger for peo-
ple.
This safety instruction warns of a potentially haz-
ardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
Warning indicating a potential danger for peo-
ple.
This safety instruction warns of a potentially haz-
ardous situation which, if not avoided, could result
in minor to moderate injury.
Attention
Warning of possible damage to property.
This safety instruction warns of damage to machin-
ery.
A safety instruction contains the following infor-
mation:
– Signal word
– Type and source of hazard
– Effects
– Escape (= measures to escape from the danger)
EN