Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
KHD Handels-GmbH - www.khd-kl.com - www.khd-handel.de - Fon +49 (0) 631 570 46 80 - Autorisierter Direkthändler Heylo Produkte
Safety:
All units have been fitted with a safety temperature switch (E).
If the unit should overheat, this safety element will trigger.
Then the fault light D will be lit red.
After a few minutes, you can release the safety element again.
By all means check the reason for the shutdown, and remove this before starting up again.
Illustration: Control panel (exhaust side)
Illustration: Control panel (suction side)
(3) Application / fields of operation
The intended purpose of the DE unit is to heat changing working places. In this respect, the unit is
used to heat rooms or materials.
ATTENTION: The DE heater units must not be used in potentially explosive environments.
Design: In order to determine heat requirement of rooms or buildings, the website www.heylo.de as
well as www.waermebedarfsrechner.de provides you with a calculator free of charge. In addition, the
heat requirement can be calculated by using the following formula:
Thermal insulation
without thermal
insulation
with insulation
C
D
E
external
surface
in sqm
in sqm
A
F
factor
temperature -
x 0.058 x
in Kelvin
x
0.04
x
in Kelvin
13
B
G
heat output
in kW
in kW
EN
Werbung
Kapitel
Inhaltsverzeichnis
