Temperature Setting; Operation Parameters - yuna FEDORA EGK225 Bedienungsanleitung

4.3 Temperature setting

WARNING THE THERMOSTAT CONTROLS THE COMPRESSOR
ONLY. You must unplug the appliance to disconnect it from the mains.
Level
Minimum
Normal
Normal
Normal
Maximum
1. The control range of the Thermostat is from setting 0 to setting 7. Move the
controller within this range only. Do not exceed settings 0 and/or 7 while
setting a temperature; otherwise the thermostat can be severely damaged.
2. Colder settings can result in higher energy consumption.
3. In case of high outdoor temperatures ( e.g. hot summer days ): turn the knob
from position 2/3/4 to position 5 or higher to set a lower temperature. If the
temperature is set to position 6/7 the compressor may run continuously to
reach the cooling level.
4. If you choose a low temperature and some rime is generated at the back of the
appliance, we recommend to select a higher temperature.
➢ You can additionally use a fridge-thermometer
temperature.

4.4 Operation parameters

1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
5 Not included in delivery
Setting
Position 1
Room temperature about +16
Room temperature about +25
cooler if required → 3-4
Position 7
0 C →1
C → 2
0
5 to check the cooling
45