Change Of The Hinge Position; Risk Of Electric Shock - yuna FEDORA EGK225 Bedienungsanleitung

Disregarding these instructions will lead to:
➢ sluggishness of the door.
➢ noise while opening or closing the door.
➢ potentially serious damage on your appliance and/or built-in unit.
Additional side-attachment
Two security angles are included in delivery to stabilize the appliance when being
built-in. Fix the angles between the two doors on the appliance and on the side of
the built-in furniture. Fix the angle of the hinge-side in combination with the hinge.
Adjust the proper position of the angles by sliding them in the screw-openings to
the right/left until they meet the sides of the built-in furniture.

3.3 Change of the hinge position

Important information: The change of the hinge position should be carried
out by a qualified professional only
intended for persons who are inexperienced in such a work.
WARNING! Unplug the appliance before changing the hinge position.

RISK OF ELECTRIC SHOCK!

CAUTION! The change of the hinge position must be carried out by
at least two persons; otherwise the appliance can be severely damaged.
CAUTION! Do not tilt the appliance more than 45
NOTICE! Adjust the door properly. The seal must close properly.
Preliminary remark
Required width between door and body:
4 Not covered by guarantee!
In this particular case
KÜTECH is not liable for any damage.
4 ! The following instructions are not
0
.
41