2.2. Preparation
▸
Connect the Behnke USB camera to the IP
base electronics 20-0001B-IP, 20-0014B-IP
or 20-0016B-IP. Configuration of the camera
possible via SIP intercom (20-0001B-IP,
20-0014B-IP, 20-0016B-IP).
2.3. Areas of application
1. Use with the Behnke IP video software on a PC
▸
Please refer to the separate instructions for
configuring the Behnke IP video software.
The IP video software and the manual can be
found at: Wiki Behnke SIP intercom station or
www.behnke-online.de/downloads/software
2. Use in video management systems
(clarify with the manufacturer of the video
management system on site)
www.behnke-online.de
Instructions for Behnke USB-Camera: 20-2950/21-2950, 50-2950
Configuration and commissioning
2.4. Password of the USB camera
Password: Admin
2.5. Retrieve video stream via browser
2.5.1. Retrieve video stream:
e.g. http://<ip-addr>:8080/key=Admin&.mjpg
or
https://<ip-addr>:8443/?key=Admin&.mjpg
2.5.2. Retrieve single image:
http://<ip-addr>:8080/?key=Admin&.jpg
or
https://<ip-addr>:8443/?key=Admin&.jpg
2.5.3. Retrieve RTSP stream:
rtsp://root:Admin@192.168.0.13:554/behn-
ke-video
For further information, please refer to the
"Camera" configuration area in the web fron-
tend of your Behnke SIP intercom station.
Make sure that the browser supports the
appropriate video formats, consult your network
administrator if necessary.
Please note: Browser not suitable for perma-
nent video viewing.
GB
21