Configuration And Set-Up; Preparation; Connection Via Ethernet; Scope Of Applications - Telecom Behnke 20-2907-IP Kurzanleitung

configuration and set-up

2.

2.1. Preparation

▸
Connect the IP camera to a 100 Mbit Ethernet
LAN
▸ Power supply via Power over Ethernet (PoE)
(1.6 on page 26) or a suitable Behnke
power supply unit (12-15VDC) e.g. 20-9585.

Connection via Ethernet

The IP camera is set up as a DHCP client, i.e.
it obtains its IP address from a DHCP server.
Use Behnke IP video software to locate existing
cameras within your network. Where the camera
is directly connected to PORT2 on the SIP basic
electronics, the camera's IP address will also be
displayed in the door intercom's web frontend.
Where the camera is connected to a network, in
which no DHCP server is available, the camera
will automatically assign itself a free IP address
within the network 169.254.0.0/16. It is also
possible to have Behnke's IP video software
locate the camera, provided the computer oper-
ates within the same network segments.
www.behnke-online.com
Behnke IP Camera 20-2907-IP/21-2907-IP, 43-9587
Configuration and Set-up

Scope of applications

1. Using the IP camera with app functionality
In case you want to use the camera together
with your smartphone and the "TC Behnke"
app please have a look at chapter „App-Funk-
tionalität mit „TC Behnke" SIP App" on page
19 (in the extensive manual).
2. Using the IP camera with a PC and the Behnke
IP video software ▸ Please have a look at the
separate instructions on IP video software
configuration as well as the system require-
ments on page 21. The IP video software is
available for download at: www.behnke-on-
line.de/downloads/software
GB
▸
27