Select Base; Register; Resetting - Medion E63032 Bedienungsanleitung

Select base

To increase the reception range of the handset, you can register it with up
to four base stations. This lets you set up a "honeycomb structure" of base
stations in your reception range.
 If there are several base stations select the desired base station and
confirm your selection with the left function button (OK).
The screen briefly displays
selected base station has been found.

Register

On delivery the handset is already registered to the base station. If this is not
the case register the handset as follows:
 Keep pressed the button PAGE for 5 seconds on the base station until you
hear a signal tone.
 Select the register menu and confirm with the left function button (OK).
 Enter the valid phone PIN (factory setting is
function key (OK).
The screen briefly displays
the selected base station has been found.

Resetting

You can reset the telephone if it has serious faults as follows:
 Enter the valid phone PIN (factory setting is
function key (OK).
 Confirm the subsequent
NOTE
When restoring to factory settings, call lists and directory entries is
retained.
38
SEARCH BASE
and then
SEARCH BASE
and then a brief beep sounds when
CONFIRM
query with the left control key (OK).
BASE FOUND
when the
0000
) and confirm with the left
0000
) and confirm with the left