Stopping Drive - Reely 1976297 Bedienungsanleitung

j) Stopping drive
To stop the drive, proceed as follows:
• Release the throttle/brake lever on the transmitter so that it is in the neutral position and let the vehicle coast to a
standstill.
• Once the vehicle is stationary, remove the car body and switch off the speed controller.
Make sure you do not touch the wheels or the drive, and do not move, under any circumstances, the throt-
tle/brake lever on the transmitter!
• Disconnect the drive battery from the cruise control. Unscrew the plug-in connection completely.
• It is only now that the transmitter may be turned off.
Attention!
The motor, speed controller and drive battery become very hot during operation! Do not touch these parts
immediately after operation. Danger of burns!
45