Technical Data - Cleanfix SW 25 K Bedienungsanleitung

Finishing the clean job / Maintenance
Switch-off the vacuuming cleaner.
●
Un-plug the unit from the electrical supply.
●
Rinse the bucket with clean water.
●
Clean the entire unit with a damp cloth.
●
The unit may never be cleaned with means of a high pressure cleaner.
●
Only use original spare parts and accessories when repairing the unit.
●
Repairs may only be made by authorised specialists who have full training on the maintenance of the
●
vacuum cleaner.
With careful treatment dry vacuum cleaners will long remain functional.
Interference / Troubleshooting
Before working on the machine disconnect mains cable!
Only do repairs and service that are mentioned in these operating instructions.
Leave service and repairs, especially repairs on electrical componants, the after sales service of an authorised
service agent.
The following advise will help you detect faults and help you resolve them:
Disturbance
Machine does not work
Insufficient vavuuming performance
Should the vacuum cleaner not work after checking above faults, please contact authorised service agent!

Technical data

Voltage
Vacuum motor
Suction (vacuum)
Content dust filter bags
Boiler capacity
Cable length
Castors
Weight without accessories
Dimensions L / W / H
Sound pressure level
Storage
Should the machine not be used it should be placed at a dry spot under normal conditions and never und 0°C.
SW 25 - Englisch
Reason
☞ Connections not plugged-in
☞ Suction hose (b), tubes (c)
☞ Tool (d,h,l or k) clogged or
☞ Dustbag (g) full
☞ Motor cover (7) not placed properly
Removal
Check connections.
●
Check hose, tubes,
●
bag and tools and
●
remove any blockages.
●
Fit motor cover (7) properly.
●
SW 25 K
230 V
1100 W
210 mbar
18 lt
20 lt
10 m
2
12,3 kg
60 / 40 / 84 cm
65 dB (A)
8