Operation; Removing/Inserting The Battery - Parkside PAP 20 B3 Originalbetriebsanleitung

GB MT
• Recharge the batteries
indoors only because
the battery charger is
designed for indoor
use only.
• To reduce the electric
shock hazard, unplug
the battery charger
from the mains before
cleaning the charger.
• Do not subject the bat-
tery to strong sunlight
over long periods and
do not leave it on a
heater. Heat damages
the battery and there is
a risk of explosion.
• Allow a hot battery to
cool before charging.
• Do not open up the
battery and avoid
mechanical damage
to the battery. Risk of
short circuit and fumes
may be emitted that
irritate the respiratory
tract. Ensure fresh air
and seek medical
assistance.
• Do not use any
accessories that are
48
not recommended by
PARKSIDE. This can
result in electric shock
or fire.
Observe the safety
information and
notes on charging
in the instruction
manual for your
Parkside X 20 V
Team series tool
and charger.

Operation

Removing/inserting
the Battery
Only insert the re-
chargeable battery
once the battery-
operated tool is
ready for use.
Risk of injury!
1. To remove the battery (4)
from the appliance, press the
release button (1) on the bat-
tery and pull out the battery.