Unit Description; Initial Use - Beurer LB 12 Gebrauchsanweisung

5. Unit description

1. Mist outlet
2. Top
3. Bottle adapter
4. Power supply unit
5. Air outlet
6. Draining outlet
7. LED
8. Ultrasonic membrane
9. Base
10. Control dial
11. Connector socket for power supply unit
12. Cleaning brush

6. Initial use

IMPORTANT
• Never touch the ultrasonic membrane during operation.
• Do not add any essential oils or fragrances to the water. This would damage the ultrasonic
source.
• Operate the air humidifier only when it has been completely assembled and is fully functioning.
• Use a plastic bottle no larger than 0.5 litres or fill a bottle with a maximum of 0.5 litres. Otherwise,
the raised water pressure may cause the air humidifier to overflow.
• Operate the air humidifier only with top and mist outlet mounted so as to avoid splashing in
the vicinity.
• Never use liquids other than water.
• Please observe the safety notes and the additional notes so as to avoid damage.
• Remove the packaging material.
• Check the device, mains plug and cable for damage.
• Place the air humidifier on a even, firm, flat and humidity-resistant surface. Ensure that the air humidi-
fier cannot be knocked over.
• Position the air humidifier in a raised place, e.g. a table, chest of drawers, chair or bedside table. To
avoid damage from the escaping mist, the device must not be placed on the floor.
• Ensure than the top is placed firmly on the base. Pull the mist outlet upwards until it noticeably en-
gages. For this purpose, you must overcome the rest resistance in the initial position with a forceful tug.
• Make sure that the escaping mist is not directed at the bottle, wall, plug socket or other objects and
that the air outlet always remains free.
5
6
7
8
9
16
1
10 11 12
2
3
4