KERN EMB-V Serie Betriebsanleitung Seite 82

6. Confirm input by
+
Density determination "liquids"
7. Hang the sinker on the suspension device.
8. Press and the weight of the sinker in air is displayed.
9. If possible, immerse the sinker bubble free in the aid liquid. Make sure that the
sinker is at least 1 cm submerged and doesn't touch the glass beaker.
10. Press and for a short time the weight of the sinker is displayed in the aid
liquid.
The scale determines the density of the liquid and then displays the result.
When connecting an optional printer, pressing of
printout example chapter 8.3.1.
Press , the balance will return to weighing mode. For further measurements
start at step 2.
32
.
(example)
(example)
(example)
will print the result, see
EMB-V-BA-e-1422