KERN EMB-V Serie Betriebsanleitung Seite 74

Calculate density
+
Access mode for the density determination of solids.
 Start balance by pressing
 Access by pressing
"SOLId" is briefly displayed, followed by the actual entered density of the aid
liquid.
+
Enter the density of the aid liquid while taking into account the current
temperature (See density table chapter 10).
 Press
and the last digit flashes.
 Use
to increase the numeric value of the flashing cipher.
Use to move the number selection to the right, the respective active
position flashes.
 Confirm input by
24
If the scale does not display zero, tare with
density determination mode for solids.

(example water at 19°C)
.
(example water at 23°C)
EMB-V-BA-e-1422