Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Procedure
+
Access mode for the density determination of solids.
5.
Turn on the scale with
6.
If the scale does not display "0.000", press
7.
Access by pressing
"SOLId" is briefly displayed, followed by the actual entered density of the aid
liquid. If necessary, change as described later.
+
Enter the density of the aid liquid while taking into account the current
temperature (See density table chapter 10).
8. Press
and the last digit flashes.
9.
Use
to increase the numeric value of the flashing cipher.
Use
to move the number selection to the right, the respective active
position flashes.
10. Confirm input by
EMB-V-BA-e-1422
, "0.000" is displayed.
density determination mode for solids.
(example water at 19°C)
.
(example water at 23°C)
21
Werbung
Inhaltsverzeichnis
