Management Web Service-Fehlercodes - HP StoreEasy 1000 Storage Handbuch

Tabelle 9 Pool Manager Provider-Fehler (Fortsetzung)
Fehlercode
0x20006009
0x2000600A
0x2000600B
0x2000600C
0x2000600D
0x2000600E
0x2000600F
0x20006010
0x2000601 1
0x20006012
0x20006013
0x20006014
0x20006015
0x20006016
0x20006017
0x20006018
0x20006019
0x2000601A
0x2000601B
0x2000601C
0x2000601D
0x2000601E
0x2000601F
0x20006020
0x20006021
0x20006022
0x20006023

Management Web Service-Fehlercodes

Die Management Web Service-Fehlercodes werden in
Fehlermeldung
The first healthy disk size within the virtual enclosure exceeded the maximum drive
capacity allowed for a pool by the virtual enclosure.
The proposed spare disk slot is empty.
The first healthy disk type within the virtual enclosure does not match the disk type
supported by the virtual enclosure.
An empty disk slot was found.
The OS pool was not found in the expected location.
The proposed spare disk is unhealthy.
The proposed spare disk in already in use.
The existing pool type does not match the virtual enclosure type.
The proposed pool cannot be created or grown because one of the concrete
pools within the pool set cannot be grown.
The existing pool contains disks of different sizes or types.
The existing pool has a RAID level that is not supported for the proposed pool.
The global spare used by this existing pool is not in the current virtual enclosure.
Some of the disks within the proposed pool are already part of another pool,
which spans the current virtual enclosure.
Some of the disks within the proposed pool are unhealthy.
Some of the disks within the proposed pool are offline.
Some of the disks in the proposed pool are marked by the storage subsystem as
cannot pool.
The number of existing pools exceeds the count specified in the rule file.
The pool is unhealthy.
Some of the disks in the proposed pool are a different type than the first disk of
the virtual enclosure.
Some of the disks in the proposed pool are a different size than the first disk of
the virtual enclosure.
Some of the disks in the proposed pool are a different spindle speed than the first
disk of the virtual enclosure.
Information on some of the disks in the proposed pool could not be read.
The proposed spare disk is a different type than the first disk of the virtual
enclosure.
The proposed spare disk is a different size than the first disk of the virtual
enclosure.
The proposed spare disk is a different spindle speed than the first disk of the
virtual enclosure.
Pool will be grown by adding spare disks only. No data disks will be added.
Some of the disks in the proposed pool are already used as spare(s).
Tabelle 10 (Seite 136) aufgeführt.
Fehlercodes 135