HP StoreEasy 1000 Storage Handbuch Seite 133

Tabelle 8 Storage Management Provider-Fehler (Fortsetzung)
Fehlercode Fehlermeldung
0x2500505E Failed to get all logical drives from cache.
0x2500505F Failed to get the controller for the logical drive from
cache.
0x25005060 The disk(s) cannot be added to this pool because
it contains at least one LUN requiring RAID level
migration.
0x21005061 Failed to remove partition data from the logical
drive. You must manually clear the disk or delete
the partition. Otherwise, subsequent volume
creation requests might fail.
0x20005062 The format of the specified RAID level is invalid.
Valid RAID levels are RAID 0, RAID 1, RAID 10,
RAID 5, RAID 6, RAID 50, RAID 60, RAID 10
(ADM), RAID 50 (2), RAID 50 (3), RAID 50 (4),
RAID 50 (5), RAID 1 (ADM), RAID 60 (2), RAID
60 (3), RAID 60 (4), RAID 60 (5).
0x20005063 The format of the specified RAID level is invalid.
Valid RAID levels are RAID 0, RAID 1, RAID 10,
RAID 5, RAID 6.
0x23005064 The length of the virtual disk friendly name exceeds
the maximum supported length.
0x24005065 Failed to get the pool from the logical drive.
0x25005068 The virtual disk could not complete the operation
because its health or operational status does not
permit it.
0x24005069 Enclosure not found in cache.
0x2500506A Failed to update enclosure in cache.
0x2400506B Failed to get the enclosure for the physical disk.
0x2400506C Failed to get WMI class names to subscribe.
0x2100506D SMP assembly file not found.
0x2700506E The registry key
HKLM\HARDWARE\Description\System\BIOS
was not found.
0x2700506F The registry key
HKLM\HARDWARE\Description\System\BIOS\
SystemProductName
was not found.
0x21005070 SmartArray.dll file not found.
0x21005071 Raptor.dll file not found.
0x21005072 Failed to get the library name to load.
Empfohlene Maßnahme
Aktualisieren Sie den Storage Management-Cache, indem
Sie den Windows PowerShell-Befehl
Update-StorageProviderCache aufrufen.
Aktualisieren Sie den Storage Management-Cache, indem
Sie den Windows PowerShell-Befehl
Update-StorageProviderCache aufrufen.
Aktualisieren Sie den Storage Management-Cache, indem
Sie den Windows PowerShell-Befehl
Update-StorageProviderCache aufrufen.
Installieren Sie HP Storage Management Provider neu.
Wiederholen Sie den Vorgang.
Starten Sie HP Storage Management Service neu.
Aktualisieren Sie den Storage Management-Cache, indem
Sie den Windows PowerShell-Befehl
Update-StorageProviderCache aufrufen.
Starten Sie HP Storage Management Service neu.
Aktualisieren Sie den Storage Management-Cache, indem
Sie den Windows PowerShell-Befehl
Update-StorageProviderCache aufrufen.
Starten Sie HP Storage Management Service neu.
Starten Sie HP Storage Management Service neu.
Installieren Sie HP Storage Management Provider neu.
Das System weist einen ungültigen Zustand auf. Wenden
Sie sich an den HP Support.
Das System weist einen ungültigen Zustand auf. Wenden
Sie sich an den HP Support.
Installieren Sie HP Storage Management Provider neu.
Installieren Sie HP Storage Management Provider neu.
Installieren Sie HP Storage Management Provider neu.
Fehlercodes 133