Herunterladen Inhalt Inhalt Diese Seite drucken

GGP ITALY CR 430 Serie Gebrauchsanweisung Seite 64

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 43
4.2 Cleaning the machine
Do  not  spray  water  onto  the  motor  and  electrical  compo-
nents and prevent them from getting wet.
Do not use aggressive liquids to clean the chassis.
4.3 Drive adjustment
On power-driven models, the drive belt tension is obtained 
by adjusting the nut (1) until the indicated measurement (6 
mm) is obtained. 
5. ATTACHMENTS
WARNING!
For your safety, it is strictly prohibit-
ed to fit any other attachment other than those included
in the following list, as they have been exclusively de-
signed for the model and type of machine you are using.
5.1 Mulching Kit
(if not included with the equipment)
It  chops  the  grass  cuttings  finely  and  leaves  them  on  the 
lawn, instead of collecting them in the grass catcher (only 
on some models).
6. DIAGNOSTICS
What to do if ....
Problem description
1. The electric lawnmower doesn't work
The machine has no power 
supply 
2. The electric lawnmower trips the power supply.
The mains socket 
amperage is insufficient
Other electrical appliances
are being used
3. The cut grass is not collected in the grass catcher
The cutting means has 
received a knock
The inside of the chassis
is dirty
4. Mowing is difficult
The cutting means is not in 
good condition
Corrective Action
Check the electrical 
connection
Connect the machine 
to a mains socket with 
sufficient amperage
Do not connect other
appliances to the same 
mains socket at the same 
time
Have the cutting means 
sharpened or replace it
Check the fins that direct 
the grass towards the 
grass catcher
Clean the inside of the
chassis to ease the grass
discharge towards the 
grass catcher
Have the cutting means 
sharpened or replace it
5. The machine starts to vibrate abnormally
Damaged or loose parts
For any doubts or problems, please do not hesitate to con-
tact your nearest Customer Service Centre or Your Dealer.
6
Stop the machine and 
disconnect the plug from 
the socket.
Inspect for damage
Check for and tighten any 
loose parts
Have all checks, repair 
work and replacements 
carried out by a specialized 
Centre only

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cs 430 serieCr 480 serieCs 480 serie

Inhaltsverzeichnis