Connecting The Charger - AUDIOLINE DECT8601 Bedienungsanleitung

CONNECTING THE CHARGER

Set up the charger for the second handset within reach of an electrical
outlet.
Plug the transformer plug in a correctly installed 230 volt electrical
outlet.
LOGGING ON A HANDSET TO THE DECT8600SIM BASE
STATION
When the batteries have been fitted in the new handset, the display
shows Register?.
Note: If the handset is already logged-on to another base station,
please go to Register in the menu. Here, select Register and then
select the number of the nearest base station. Then continue with the
entry of the PIN code.
Display shows Register?
Press the Yes display button
Now select which base station you want to log the handset on to. With
one existing base station, press the number 1 and the OK display
button.
Enter the SYS PIN (factory setting 0000) and confirm with OK.
Now press the button on the base station until the LED on the
base station flashes.
The handset will search for the base station and after a few seconds
the handset will be logged-on. The handset will automatically be
allocated the next free internal phone number between 2 and 6.
8