Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
These supplemental operating instructions describe how install additional handsets with the
AUDIOLINE 5500TECH and other DECT/GAP cordless telephone systems. However, all
functions supported by this handset are available only in conjunction with the AUDIOLINE
5500TECH.
Note: Please refer to the free download in our Website
complete operating instructions including the declaration of conformity and notes on
safety applicable to this extension set.
SCOPE OF SUPPLY
The following parts are enclosed in the package:
5500TECH Handset with belt clip
Charger
Two standard 1.2-volt AAA rechargeable batteries
FITTING STANDARD BATTERIES
To fit the standard rechargeable batteries supplied into the handset, press on the upper
edge of the battery compartment and slide it downwards. Now insert the batteries taking
care to ensure that the polarity is correct. Close the battery compartment cover.
Important note: Place the handset in the base station with the display to the front for at
least 16 hours. The telephone may malfunction if the batteries are not properly charged.
The charging light on the base station will come on.
CONNECTING THE CHARGER
Set up the charger within reach of a electricity supply socket. Insert the red connector on the
lead from the transformer plug in the socket on the underside of the charger and insert the
transformer plug in a 230V supply socket installed in accordance with regulations. For
safety reasons, use only the transformer plug supplied. Press the cable into the cable
channel leading to the rear of the charger.
5501TECH
Operating instructions
Power supply
www.audioline.de
for
5
Werbung
Inhaltsverzeichnis
