Switching Off The Ring Tone; Range Information; Paging From The Base Station To The Handsets - AUDIOLINE DECT 4100B Bedienungsanleitung

4.10 Switching off the ring tone

If at any time you do not want to be disturbed, you can turn off the ring
tone on the handset.
Switching off the ring tone
Press and hold the
in the display. Incoming calls will now only be signalled at the base station
and no longer at the handset.
Switching on the ring tone
Press and hold the
display will go off.

4.11 Range information

The range of the handset is ca. 50 m in closed rooms and ca. 300 m
outdoors. When there is a good contact with the base station, the
symbol will come on in the display. The symbol will disappear if you are
too far away from the base station.

4.12 Paging from the base station to the handsets

If you cannot remember where you have left the handsets, press the
paging button
audible signal for 30 seconds and thus be easily able to find them again.
You can cancel the audible signal by pressing any button on the handset.
40
- Operation -
*
button for 2 seconds. The
*
button again for 2 seconds. The
on the base station. You will now hear the handset
symbol will appear
symbol in the