Changing The Pin Code; Internal Calls (Intercom Function) - Audioline Dect3800 Bedienungsanleitung

11.1.4

Changing the PIN code

Registration and deregistration of handsets are protected against unauthorised use
by a PIN code. The PIN code can comprise of up to eight digits. When delivered, the
PIN code is "0000". Proceed as follows to change the PIN code:
1. Press the Menu button
2. Press the
menu.
3. Confirm by pressing the
4. Press the
menu.
5. Confirm by pressing the
6. Enter the base station PIN code using the digit keys
(default setting: 0000) and confirm it by pressing
7. Enter the new PIN code using the digit keys and
confirm the entry by pressing
8. Enter the new PIN code again using the digit keys
and confirm the entry by pressing
9. Press the
Note: If the old PIN code is not entered correctly, the
process is cancelled.
Note: If you forget the PIN code, restore the default setting (refer to Chapter
9.2.5).
11.2

Internal calls (intercom function)

As soon as several handsets are registered on a base station, they can be used for
internal calls.
1. Press the
2. Press the number of the required handset.
3. The call is taken on the receiving handset by pressing the Call button
Note: If an external call is received during an internal call, short acoustic signals
are issued and the caller's number appears in the display, if available.
4. End the internal call by pressing the
pressing the
- Multiple Handsets -
B
.
B E
and buttons to select the SETTINGS
F
B E
and buttons to select the PIN CODE
F
C
button to exit from the menu.
G
button.
A
button on one of the handsets.
button.
button.
F
.
F
.
C
button and take the external call by
defghijkl
SETTINGS )(
n
defghijkl
PIN CODE )(
n
defghijkl
PIN?
F
.
n
defghijkl
NEW PIN?
n
defghijkl
REPEAT?
n
o p
o p
o p
o p
o p
A
.
91